Brake Torque Confirmation - Sony Betacam SX DNV-5 Maintenance Manual

http://getMANUAL.com

4-1-4. Brake Torque Confirmation

4-1-4. Brake Torque Confirmation
Precaution
Confirm the brake torque when the T soft brake assembly and/or T reel table
assembly are replaced.
Preparation
1. Confirm that the unit is in the unthreading end state.
2. Remove the front lid and outside panel.
(Refer to section 1-6 in Part 1 of the Maintenance Manual.)
n
It is recommended to perform this adjustment with the cassette compartment
installed in the unit. If the cassette compartment is not installed, block the photoin-
terrupter (cassette compartment lock switch) mounted on the MDC-5 board with
black paper and put the unit into the cassette lock state. Moreover, place a weight for
adjustment so that the FWD back tension measurement cassette is not floated.
Tool
. FWD back tension measurement cassette
J-6323-890-A
4-7
DNV-5
DNW-7/90/90WS