Sony Betacam SX DNV-5 Maintenance Manual page 55

Threading end
Turn the warm wheel clockwise using a Phillips screwdriver.
In this state, the rotation of the intermittent gear stops, and the illustrated sections of
the S gear assembly and T gear assembly are opened fully.
n
If turning the warm wheel in the threading direction even further, the parts that
constitute the unit may be damaged.
S slider
Open
S gear assembly
Unthreading end
Turn the manual eject gear clockwise while pushing it downward or turn the warm
wheel counterclockwise using a Phillips screwdriver.
In this state, the cassette compartment is put in the up state.
When no cassette compartment is installed, the S and T sliders reach the position
shown in the figure and the rotation of the intermittent gear stops.
n
If turning the warm wheel or manual eject gear in the unthreading direction even
further, the parts that constitute the unit may be damaged.
S slider
DNV-5
DNW-7/90/90WS
http://getMANUAL.com
T slider
Open
T slider
3-1-4. Precaution during Manual Ejection
T gear assemby
Intermittent gear
(White gear
under the T rail)
Intermittent gear
(White gear
under the T rail)
3-5