Sony Betacam SX DNV-5 Maintenance Manual page 91

Removal
1. T soft brake assembly removal
(1) Remove the stop washer.
(2) Unhook the tension coil spring and remove
the T soft brake assembly.
Installation
2. T reel table cleaning
Clean the brake contact surface of the T reel table
with cleaning cloth moistened with cleaning fluid.
3. T soft brake assembly installation
(1) Install a new T soft brake assembly and hang
the tension coil spring.
(2) Install the stop washer.
Adjustment after replacement
4. Brake torque confirmation
(Refer to section 4-1-4.)
DNV-5
DNW-7/90/90WS
3-3-1. T Soft Brake Assembly Replacement
Stop washer
T soft brake
assembly
Tension
coil spring
Cleaning
(T reel table)
3-41