Sensor (A) Detection Pin Replacement - Sony Betacam SX DNV-5 Maintenance Manual

3-3-10. Sensor (A) Detection Pin Replacement

3-3-10. Sensor (A) Detection Pin Replacement
Outline
Replacement
S soft brake assembly removal
Sensor cover (A) removal
Detection pin removal
Detection pin installation
Sensor cover (A) installation
Operation confirmation
S soft brake assembly installation
Preparations
1. Turn off the power.
2. Remove the front lid and outside panel.
(Refer to section 1-6 in Part 1 of the Maintenance Manual.)
n
The sensor (A) detection pin can be replaced with the cassette compartment installed
in the unit.
Removal
1. S soft brake assembly removal
Remove the two screws, then remove the S soft
brake assembly.
2. Sensor cover (A) removal
Remove the sensor cover (A) upward while
unhooking the three hooks using tweezers.
3-64
S soft brake assembly
Hooks
Screws
(P1.4 x 3.5)
Hook
Sensor
cover (A)
DNV-5
DNW-7/90/90WS