Sony Betacam SX DNV-5 Maintenance Manual page 47

LCD Display (factory setting)
DIAG 6-6
VTR MODE SEL-6
66 00000
1 2 3 4 5
DIAG 6-7
VTR MODE SEL-7
67 00
1 2
DIAG 6-8
VTR MODE SEL-8
68 0000
1 2 3 4
DNV-5
DNW-7/90/90WS
Description
1. LTC UBIT : Sets the data recorded in the user bits of LTC.
0 : Fixed data (Conventional-type user bits)
1 : Time of internal timer (in real time)
2 : Shot data
2. LTC UB-MARKER : Sets whether to write the mark below in the user bits of LTC.
REC start mark
Shot mark 1
Shot mark 2
0 : Conform to the menu setting below.
1 : Writes all marks.
2 : Writes nothing.
3. REC START MARKER
(Valid when the LTC UB-maker is set to SW.)
0 : Writes.
1 : Not write.
4. SHOT MARKER 1
(Valid when the LTC UB-marker is set to SW.)
0 : Writes.
1 : Not write.
5. SHOT MARKER 2
(Valid when the LTC UB-marker is set to SW.)
0 : Writes.
1 : Not write.
1. VITC UBIT : Sets the data recorded in the user bits of VITC.
0 : Fixed data (Conventional-type user bits)
1 : Time of internal timer (in real time)
2 : Shot data
2. SHOT DATA : Sets the data length of the VITC shot data.
0 : Record data of date, time, model ID, serial No., cassette No., shot No.
1 : Record data of date, time, model ID, serial No., cassette No., shot No.,
shot ID 1 to 4.
1. NTSC/PAL SW : Sets the NTSC or PAL systems.
0 : Conforms to the NTSC/PAL switch setting on the inside panel.
1 : NTSC
2 : PAL
2. DF/NDF : Sets the DF or NDF. (Valid for NTSC only.)
0 : Drop frame
1 : Non-drop frame
3. RE SW AS RETURN : Sets whether to use the rotary encoder as the record start switch
of a shot marker.
0 : Uses.
1 : Not use.
4. SAVE : Sets whether to effect the SAVE switch.
0 : Effects.
1 : Not effect.
2-2. DIAG Memu
2-33