Sony Betacam SX DNV-5 Maintenance Manual page 17

Pages configuration of the SETUP menu
Viewfinder screen (Factory default setting)
*** MARKER 1/2 ***
SAFETY ZONE : ON
SAFETY AREA : 90 %
CENTER : ON
CENTER H
CENTER V
*** MARKER 2/2 ***
BOX CURSOR : OFF
BOX WIDTH
BOX HEIGHT
BOX H
BOX V
** VF DISPLAY 1/2 **
DISP MODE : 3
EXTENDER : ON
ZOOM : ON
** VF DISPLAY 2/2 **
FILTER : ON
WHITE : ON
GAIN : ON
SHUTTER : ON
TAPE : ON
AUDIO : ON
IRIS : ON
*** MASTER GAIN ***
LOW : 0 dB
MID : 9 dB
HIGH : 18 dB
TURBO : 36 dB
*** SHOT ID ***
ID-1 :
ID-2 :
ID-3 :
ID-4 :
*1 : The box cursor is not functioned in the following conditions (DNW-90WS/90WSP only).
1. Set the "BOX/4:3 LIMITS" to 4:3 at WIDE SCREEN page.
2. Set the "BOX/4:3 LIMITS" to 4:3, and "VF ASPECT" to 16:9A or 16:9B at WIDE SCREEN page.
DNV-5
DNW-7/90/90WS
Description
........... Sets the safety zone marker display to ON or OFF.
........... Sets the safety zone area to 80 %, 90 % or 100 %.
........... Sets the center marker display to ON to OFF.
........... Moves the center marker horizontally.
........... Moves the center marker vertically.
........... Sets the box cursor display to ON or OFF.
........... Changes the width of the box cursor.
........... Changes the height of the box cursor.
........... Moves the box cursor horizontally.
........... Moves the box cursor vertically.
........... Set whether to display the items partially or to display no item. (1/2/3)
........... For details, refer to the Operation Manual.
........... Sets the extender display to ON or OFF.
........... Sets the zoom position display to ON or OFF.
........... Sets the filter display to ON or OFF.
........... Sets the white balance display to ON or OFF.
........... Sets the gain selection value display to ON or OFF.
........... Sets the shutter speed/mode display to ON or OFF.
........... Sets the tape remaining display to ON or OFF.
........... Sets the CH-1 audio level display to ON or OFF.
........... Sets the iris value display to ON or OFF.
Sets the gain corresponding to the LOW, MIDDLE, HIGH and TURBO positions of the
gain selector switch.
Selects a GAIN value from -3, 0, 3, 6, 9, 12, 18, 24, or 30 dB .
Selects a TURBO value from -3, 0, 3, 6, 9, 12, 18, 24, 30, or 36 dB.
n
When the gain selection value is changed, the BLACK SET adjustment
(Section 8-13) is required.
Sets the shot ID of a maximum of twelve characters using alphanumeric character,
symbol, and space.
2-1. Setup Menu
*
1
2-3