Removal And Installation Of Mechanical Deck Assembly - Sony Betacam SX DNV-5 Maintenance Manual

3-3-25. Removal and Installation of Mechanical Deck Assembly

3-3-25. Removal and Installation of Mechanical Deck Assembly
Outline
Removal and installation
Mechanical deck assembly removal
Mechanical deck assembly installation
Adjustment after installation
Tape running adjustment
Preparations
1. Turn off the power.
2. Remove the front lid, inside panel, and outside panel.
(Refer to section 1-6 in Part 1 of the Maintenance Manual.)
n
The mechanical deck assembly can be removed/installed with the cassette compart-
ment installed in the unit.
Tools
. Torque screwdriver bit (across 1.5 mm)
. Torque screwdriver (for 3 kg)
Removal
1. Mechanical deck assembly removal
(1) Fully loosen the five MD securing screws
(with stopper) using a hexagonal bit.
3-100
J-6326-120-A
J-6325-400-A
Positioning hole
MD securing screw
MD securing screw
Positioning hole
CN5 (MDC-5 board)
MD securing screw
MD securing screws
DNV-5
DNW-7/90/90WS