Sony Betacam SX DNV-5 Maintenance Manual page 22

2-1. Setup Menu
Viewfinder screen (Factory default setting)
* LEVEL 3 *
MASTER BLACK : 0
MASTER GAMMA : 0
KNEE POINT 1 : 0
KNEE SLOPE 1 : 0
KNEE POINT 2 : 0
KNEE SLOPE 2 : 0
KNEE SELECT : 1
WHITE CLIP : ON
WHT CLIP LEV. : 0
* LEVEL 4 *
BURST LEVEL : 0
BURST PHASE : 0
R-Y : ON
B-Y : ON
R-Y LEVEL : 0
B-Y LEVEL : 0
* LEVEL 5 *
RGB LEVEL : 0
RGB SYNC LEV. : 0
RGB SETUP LEV. : 0
ENC Y LEVEL : 0
ENC SYNC LEV. : 0
ENC SETUP LEV. : 0
*1: This level can be set in the 4:3/16:9 mode separately using DNW-90WS/90WSP.
2-8
Description
........... Sets the black level.
........... Sets the gamma correction curve.
........... Used for the manual knee adjustment. Sets the knee point and slope.
........... Used for the manual knee adjustment. Sets the knee point and slope.
........... Sets the knee patterns KNEE1/KNEE2/OFF. The knee correction is forcibly
canceled regardless of DCC ON/OFF setting when this item is set to OFF.
Set the knee correction set by KNEE POINT 1/KNEE SLOPE 1 setting when
this item is set to 1.
........... The white clip is forcibly canceled when this item is set to OFF.
Used for the video system adjustment.
........... Sets the white clip level.
........... Used for the chroma adjustment of the encoder.
........... Used for the chroma adjustment of the encoder. (for PAL only)
........... Sets whether to add the R-Y signal to the encoder circuit.
........... Sets whether to add the signal to the encoder circuit.
........... Used for the R-Y adjustment of the encoder.
........... Used for the B-Y adjustment of the encoder.
n
The setting of the "CHROMA" item on the "FUNCTION 1/2" page has priority
over the ON/OFF setting of the "R-Y" and "B-Y" items. When the CHROMA is
set to ON, it automatically returns to ON by turning the power switch to ON/OFF
even if the R-Y or B-Y item is to OFF. This item does not returns to ON when
the "CHROMA" item is set to OFF.
........... Sets the R/G/B video level.
........... Sets the R/G/B sync level.
........... Sets the R/G/B setup level.
........... Sets the encoder output Y level.
........... Sets the encoder output sync level.
........... Sets the encoder output setup level.
*1
*1
*1
*1
DNV-5
DNW-7/90/90WS