Pinch Roller Replacement - Sony Betacam SX DNV-5 Maintenance Manual

3-2-6. Pinch Roller Replacement

3-2-6. Pinch Roller Replacement
Outline
Replacement
Pinch roller removal
Installation shaft cleaner
Pinch roller installation
Pinch roller cleaning
Adjustment after replacement
Tape running adjustment
TC head height confirmation
Precaution
If a pinch roller is worn, replace only the pinch roller. Make sure the wearing of
gloves when replacing the pinch roller.
Preparations
1. Confirm that the unit is in the unthreading end state.
2. Turn off the power.
3. Remove the front lid and outside panel.
(Refer to section 1-6 in Part 1 of the Maintenance Manual.)
n
The pinch roller can be replaced with the cassette compartment installed in the unit.
Tools
. Torque screwdriver bit (for M1.4)
. Torque screwdriver (for 3 kg)
. Cleaning cloth
. Cleaning fluid
3-32
J-6325-110-A
J-6325-400-A
3-184-527-01
9-919-573-01
DNV-5
DNW-7/90/90WS