Sony Betacam SX DNV-5 Maintenance Manual page 126

3-3-14. FE Head Replacement
Removal
1. CTL/FE head assembly removal
(1) Disconnect connector CN505 on the MDC-5
board.
(2) Remove the three screws, then remove the
CTL/FE head assembly from the unit.
n
Be careful not to damage the video head, drum,
erase head, tape guide, and other parts with a
screwdriver.
2. FE head removal
(1) Desolder the two lead wires connected to the
FE head.
(2) Remove one screw at the back of the CTL/FE
head assembly, then remove the FE head.
3-76
MDC-5 board
FE head
Screw
(M2 x 5)
Screws (M1.4 x 3.5)
CTL/FE head assembly
CN505
Harness
CTL/FE head
assembly
DNW-7/90/90WS
DNV-5