Status And Alarms - Thermo Scientific 42iQHL Instruction Manual

Status and Alarms

Thermo Scientific
The Status and Alarms screen provides information with respect to module
alarms. In each screen, instrument readings, setpoints, and low/high alarm
values are displayed. If applicable, setpoints and alarms are also settable
from the Settings>Instrument Settings screen.
Note This symbol denotes there is an active alarm in the module.
Home Screen>Settings>Health Check>Status and Alarms
Home Screen>Settings>Health Check>Status and Alarms>More
The Status and Alarms screen contains the following information:
Concentration: Displays NO/NO
●
Reaction Chamber: Displays reaction chamber alarms and faults.
●
Ozonator: Displays ozonator alarms and faults.
●
NO Converter: Displays NO
●
2
O Sensor: Displays O
●
2
enabled).
/NO concentrations and alarms.
2 x
converter alarms and faults.
2
sensor concentrations, alarms and faults (if
2
Operation
Settings
▲
42iQHL Instruction Manual 3-47