Accessing Local Management - Cabletron Systems SEHI-22 User Manual

6.2

ACCESSING LOCAL MANAGEMENT

After configuring the local management terminal and properly attaching
the cables to the SEHI, access the Local Management interface.
To access Local Management:
1. Power up the terminal. The SEHI password screen (Figure 6-2)
appears.
2. Enter the Password. The factory default password for Super-User
access is "public" or the Return key.
The password is one of the community names specified in the
Community Name Table. Access to certain Local
NOTE
Management capabilities depends on the degree of access
accorded that community name. See Section 6.3.1 for more
details about community names.
SEHI USER'S GUIDE
ACCESSING LOCAL MANAGEMENT
SEHI LOCAL MANAGEMENT
Cabletron SEHI Revision X.XX.XX
Cabletron Systems Incorporated
35 Industrial Way, P .O. Box 5005
Rochester, NH 03867-0505 U.S.A.
(603) 332-9400
(c) Copyright Cabletron Systems, Inc. 1993
SEHI F/W Version: X.XX.XX
Boot Prom Version: X.XX.XX
SEHI Board Version: X.X
EnterUser Password:
Figure 6-2. Password Screen
1490_21
6-5