Accessing Local Management - Cabletron Systems HubSTACK SEHI-34 User Manual

6.2 ACCESSING LOCAL MANAGEMENT

After you configure the local management terminal and properly
attach the cables to the SEHI, you can access the Local Management
interface.
To access Local Management:
1. Power up the terminal. The SEHI Password screen shown in
Figure 6-2 appears.
2. Enter your Password. The factory default password for
Super-User access is "public" or the Return key.
Note: Your password is one of the community names specified in the
Community Name Table. Access to certain Local Management
capabilities depends on the degree of access accorded that community
name. See Section 6.3.1 for more details about community names.
SEHI LOCAL MANAGEMENT
Cabletron SEHI Revision X.XX.XX
Cabletron Systems Incorporated
35 Industrial Way, P .O. Box 5005
Rochester, NH 03867-0505 U.S.A.
(603) 332-9400
(c) Copyright Cabletron Systems, Inc. 1993
SEHI F/W Version: X.XX.XX
Boot Prom Version: X.XX.XX
SEHI Board Version: X.X
EnterUser Password:
Figure 6-2. Password Screen
LOCAL MANAGEMENT
Page 6-5