EXIT
ENABLE PORT
3.4 ACCESSING LOCAL MANAGEMENT VIA TERMINAL
To use MRXI/LM, the console must be connected as described in
Chapter 2, Attaching the Console. To access MRXI/LM:
1. If not already powered on, power on the MRXI.
2. Turn on power to the terminal. After a brief (approximately 5
seconds) warmup, the Password Screen appears (see Figure 3-2).
3. If you are not using the password feature of MRXI/LM or if you
have not yet applied your own password, press Return.
If you have applied a password known only to you, enter that
password now, then press Return.
PASSWORD SCREEN
MRXI SNMP LOCAL MANAGEMENT
DEVICE/PORT INFORMATION SCREEN
SAVE
PORT n
RESET COUNTERS
DISABLE PORT
COMMUNITY NAMES
COMMUNITY NAMES
RETURN
Figure 3-1. MRXI/LM Screens
GETTING STARTED
MAIN
ENABLE ALL PORTS
DISABLE ALL PORTS
SAVE
Page 3-3