Deleting Arrays; Deleting A Single Array In Multiple-Array Systems; Deleting The Only Array Or All Arrays - Adaptec AHA-3980 User Manual

From the status bar screen, press Esc. From the menu that
appears, select Change Priority. When prompted to select a
new priority, type a number from 0 through 9, where 0 is the
lowest priority.
The conversion continues automatically, running at the new prior-
ity.

Deleting Arrays

In systems with only one array, you use the De-install Array NLMs
option to delete the array. In systems with multiple arrays, you can
delete arrays singly by using the Delete an Array option. To remove
all arrays at once, you use the De-install Array NLMs option. This
section describes both options.
Caution:
Before you delete an array, back up any data you
want to keep. When you delete the array, all array data will
be lost!

Deleting a Single Array in Multiple-array Systems

If the system has multiple arrays, follow these steps to delete a sin-
gle array:
1
From the System menu, select Change Array Configuration.
The System Configuration menu appears.
2
Select Delete an Array. A menu of arrays appears.
3
Select the array you want to delete. A prompt asks you to con-
firm that you want to delete the array.
4
Type y to delete the array, or n to cancel the operation.
5
Restart the server.
The disks can now be used as standard NetWare drives.

Deleting the Only Array or All Arrays

To delete the system's only array or to delete all arrays on a server,
you must remove from the startup.ncf and autoexec.ncf files all
Creating and Managing Arrays
Stock Number: 510685-00, Rev. A
Print Spec Number: 493069-00
Current Date: 3/3/99
Changing Array Configurations
7-9
Page: 7-9
ECN Date: 3/28/95