Table of Contents
Advertisement
2
Highlight SCSI Parity Checking, then press Enter. The pop-up
menu shown in Figure 3-6 appears.
Adaptec AHA-3940 Ultra/Ultra Wide
AHA-3940 Ultra/Ultra W at Bus:Channel 01:A
Configuration
SCSI Channel Interface Definitions
Host Adapter SCSI ID ........................................
SCSI Parity Checking ........................................
Host Adapter SCSI Termination ........................
Additional Options
Boot Device Options...........................................
SCSI Device Configuration ................................
Advanced Configuration Options .......................
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit ( * = default)
Figure 3-6. SCSI Parity Checking Selection
3
Highlight Enabled or Disabled, then press Enter.
Host Adapter SCSI Termination
The host adapter termination default setting for SCSI channels is Auto-
matic. "Automatic" means that the host adapter automatically enables
or disables termination, according to the following table.
Connectors Used on Channel
Internal connector only; host adapter at end of channel
External connector only; host adapter at end of channel
Internal and external connectors; host adapter in middle of channel
We recommend leaving the setting at Automatic.
AHA-3940U/3940UW/3940UWD User's Guide
Stock Number: 511041-00, Rev. B
Print Spec Number: 494569-00
Current Date: 2/14/97
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Configuring Your Host Adapter
SCSISelect(TM)
7
Enabled
Automatic
*
Enabled
Disabled
Press <Enter>
Press <Enter>
Press <Enter>
<F6> - Reset to Host Adapter Defaults
ECN Date: 2/17/97
Utility v1.22
Termination
Enabled
Enabled
Disabled
3-9
Page: 3-9
Advertisement
Table of Contents
