Table of Contents
Advertisement
Model:
Sh-MF1 (Only for Health Care Models)
PROCEDURE
Confirmation
Check the condition of the Mylar. If it has been attached incorrectly or there is no Mylar
attached, do the Main Procedure below.
Correct
Correct position
Incorrect
- The Mylar is not attached in the correct position described above, or
- The Mylar is unstable (not attached firmly), or
- There is no Mylar attached
Main Procedure
1. Remove paper tray 1.
2. Tilt the machine backwards, as shown in the photo.
echnical
T
B
- The edges of the guide and Mylar are aligned.
- The Mylar is attached firmly (it is stable).
ulletin
Date:
1-Aug-14
PAGE: 2/6
No.:
RM052072
Advertisement
Table of Contents
