Table of Contents
Advertisement
Model:
Shinka-MF1
5. Make sure that App2Me is NOT installed.
If App2Me is installed, that machine will NOT be a CC-certified machine. In this case, turn
off the machine main power, remove the VM card containing App2Me from slot 2, and then
give the VM card to the customer.
6. Make sure the machine contains the correct firmware.
Print SMC by SP mode to check the firmware versions.
● If the customer wants to install the machine in the same condition as when CC
Certification was first attained (same as the August 2012 machines), install the exact
versions shown in the table below.
● If the customer wants to install the machine as an equivalent of the August 2012
machines, install the versions shown in the table below or later.
If you are not sure which one the customer is requesting, contact your sales department.
T
B
echnical
ulletin
Date:
30-Oct-12
PAGE: 6/10
No.:
RM052048
Advertisement
Table of Contents
