Table of Contents
Advertisement
Model:
Sh-MF1 (Only for Health Care Model)
3. Remove the film, making sure that none of the double-sided tape remains.
Front
4. Clean both surfaces well (inner/outer) using a towel.
5. Align the seal on the outer surface, then on the inner surface.
Important:
Do not touch the adhesive (surface).
Make sure that the connection seals are aligned evenly at positions A and B (see
below).
T
B
echnical
Base
ulletin
Date:
18-Apr-13
PAGE: 3/8
No.:
RM052056
Mylar
Advertisement
Table of Contents
