Table of Contents
Advertisement
T
B
echnical
ulletin
PAGE: 2/2
Model:
Date:
No.:
Sh-MF1
14-Dec-11
RM052026
A
5. Connect the other terminal of the harness to "CN234" [A] on the BCU.
A
A
A
6. Route the harness and clamp it with three clamps [A] as shown above.
A
7. Cut off the part [A] of the rear cover.
A
8. Connect the harness from the optional counter device to "CN4" [A] on the optional counter interface
board through the cut off part of the rear cover.
9. Reassemble the machine.
Advertisement
Table of Contents
