Table of Contents
Advertisement
Model:
Sh-MF1
Important: If there is no available screw hole in the user's tray, replace the tray
with the following part (which contains the required screw holes).
Note: This part can also be used on the HC model.
Old part
New part
number
number
M0522500
M0522501
Important notes:
The new screw holes are for LT/A4 and LG paper sizes. If the user always uses the
same paper size, fix the extension tray in place at the corresponding position. If the
user does not always use the same paper size, fix the extension in place for LG
sized paper.
Insert the screws from the outside face of the tray. For each paper size, there are two
screw holes, as shown.
Be careful not to over-tighten the screws.
LT & A4 type
echnical
T
Description
TRAY:PAPER FEED UNIT
LG type
ulletin
B
Date:
28-May-14
Q'ty
Int
1
X/O
PAGE: 2/3
No.:
RM052055a
Page Index Note
45
*
Advertisement
Table of Contents
