Model:
Sh-MF1/P1
Procedure for the WRISTBAND MODEL
1. Change the position of the paper thickness lever and attach the cover decal, as
described above in the Procedure for the STANDARD MODEL.
2. Change the tension springs and Teflon Mylar as described above in the Procedure for
the HC MODEL.
Do not put pressure on the 3-inch tray bottom plate. This bottom plate
IMPORTANT:
deforms more easily compared to those on other models, due to its
geometry.
!NG!
3. Remove the two rings.
echnical
T
B
Rings
ulletin
Date:
24-Mar-15
PAGE: 12/23
No.:
RM052089