Table of Contents
Advertisement
echnical
ulletin
T
B
PAGE: 5/23
Model:
Date:
No.:
Sh-MF1/P1
24-Mar-15
RM052089
Procedure for the HC MODEL
1. Change the position of the paper thickness lever and attach the cover decal, as
described above in the Procedure for the STANDARD MODEL.
2. Lift the bottom plate while releasing the Near-End detection feeler.
3. Remove the springs (2 pcs) from the bottom and top of the plate.
4. Attach the new springs from the opposite side to the bottom plate side.
IMPORTANT: Make sure that the direction
of the hook is correct.
Advertisement
Table of Contents
