Table of Contents
Advertisement
SECTION 2. ROUTINE OPERATION
1-2. Transmission Procedure at a Glance
1. Make sure that the machine is in
standby mode.
2. Carefully place the document into the
auto document feeder.
Not more than 50 pages.
Selecting Contrast and Resolution: See page 22.
Options for Sending a Message: See page 23.
3. Dial in one of the following ways.
a) Ten Key Pad
If your machine is behind a PBX, dial the access code, then a pause, then the telephone no.
For an international number, press the Pause key after entering the country code.
4.
Start
The machine stores your fax message.
5. The machine dials, and the line to the other party is connected.
Note: Watch the display. The identification of the other party will appear.
6. After sending the message, the machine hangs up automatically.
20
b) Quick Dial
MEMORY TRANS
SET DOCUMENT
MEMORY TRANS
ENTER FAX NUMBER
_
c) Speed Dial
: Only if the telephone handset is installed.
STORING
PAGE
FILE NO.
4 APR 12:25
MEMORY 100%
OPTIONS
d) Handset
MEMORY 99%
1
0056
Advertisement
Table of Contents
