Table of Contents
Advertisement
Model:
Sh-MF1
Subject: Optional Counter Interface Unit Type A
Installation procedure
From:
3rd Tech Service Sect., MFP/P Tech Service Dept.
Classification:
Optional Counter Interface Unit Type A installation procedure
1. Remove the left cover.
A
2. Install the four stud stays in the location [A].
3. Install the optional counter interface board on the four stud stays.
A
4. Connect the harness to CN3 [A] on the optional counter interface board.
T
echnical
Troubleshooting
Mechanical
Paper path
Product Safety
B
ulletin
Date:
14-Dec-11
Prepared by:
Part information
Electrical
Transmit/receive
Other (
)
PAGE: 1/2
No.:
RM052026
T.Hirai
Action required
Service manual revision
Retrofit information
Advertisement
Table of Contents
