Table of Contents
Advertisement
Reissued: 30-Jun-15
Model:
Sh-MF1
Version
10.64
Symptom corrected:
1.
SC991 might occur and network functions could not be used. This occurs if
DHCP and DDNS are both enabled in the device and if the DHCP server
distributes to the device an FQDN that is more than 127 byte in length.
2.
Device applications or services that use any of port 80, 443, 7443 or 7444
could not be used. This occurs if the illegal packet is sent after SSL negotiation
handshake to any of the device's TCP ports 443, 7443 or 7444. Affected
applications include Web Image Monitor, IPP Printing and @Remote.
10.63
Minor changes.
10.62
Symptom corrected:
1. Use of an IP address to send a Scan to SMB might result in the scanned
document not being sent.
2. Scan to SMB fails if the both of the following conditions are met.
-
-
3. If the device's IPP Authentication setting is enabled, the driver cannot be
installed on Windows 2008 R2 SP1 or 7 SP1 using an IPP port.
4. Jobs were intermittently cancelled if "LPR Byte Counting Enabled" was
unchecked for LPR ports.
10.61
1st Mass production
echnical
T
Modified Points or Symptom Corrected
Either the device has NBT disabled or it is enabled but the device is unable
to resolve the destination's NetBIOS name.
One or more octets in the destination's IPv4 address contain leading zeros.
ulletin
B
Date:
10-Aug-11
PAGE: 2/2
No
.: RM052018f
Advertisement
Table of Contents
