Table of Contents
Advertisement
Model:
Sh-MF1
Installation Procedure
Before you begin this procedure, make sure to turn off the main power switch, and
then remove the power cord from the outlet. If you do not, this may result in
electrical shock and/or a machine failure.
IMPORTANT:
Confirm the following settings and then change them if necessary, as described
below. If you do need to change them, inform the customer that this is necessary
in order to install the option.
1. Make sure that the following are not at their factory default values:
Supervisor login name and password
Administrator login name and password
2. Make sure that Admin. Authentication is ON.
[System Settings] – [Administrator Tools] – [Administrator Authentication Management] –
[Admin. Authentication]
3. Make sure that Administrator Tools is enabled (selected).
[System Settings] – [Administrator Tools] – [Administrator Authentication Management] –
[Available Settings]
Note: See the Operating Instructions (Security Guide) for the factory default
values.
1.
Disconnect the network cable from the machine.
2.
Remove the SD slot cover [A] ( ×1).
3. Push the SD card for the Data Overwrite Security Unit Type I [B] slowly into Slot 2 (lower slot),
until you hear a click.
IMPORTANT:
If you wish to merge multiple applications onto a single SD card, do the merge
now before moving onto the next step.
T
B
echnical
ulletin
Date:
1-Oct-13
PAGE: 2/5
No
.: RM052062
Advertisement
Table of Contents
