Table of Contents
Advertisement
Reissued: 29-Jan-15
Model:
Sh-MF1
6. Remove spring (2 pieces) from the bottom tray side first, and then remove them from
opposite side also.
Spring
7. Tilt up the bottom tray as shown.
8.
DO NOT put pressure on the bottom tray!
The 3 inch bottom tray is not as strong as those used on normal models. Push the
outside guide outward, as shown in the photos, while being careful not to put any
pressure on the bottom tray.
Do not press down on a small area/point too much, so as to avoid any breakage.
OK
echnical
T
Bottom tray
side
Opposite side
ulletin
B
Date:
5-Dec-14
！NG！
PAGE: 5/9
No.:
RM052083a
Advertisement
Table of Contents
