Table of Contents
Advertisement
Model:
Sh-MF1
6.
Press the cushion with your finger gently from middle to right and left side.
7.
Confirmation process.
1) The Mylar angle/corner.
The Mylar position. (There should not be a gap more than 0.5mm)
2)
1) Press the Mylar as follows. The Mylar angle is important, as shown.
OK
NG
2) Fit the Mylar and guide angle/corner. Make sure the Mylar and guide gap do not
overlap.
Guide gap
echnical
T
The Mylar over wrap
the guide gap
ulletin
B
Date:
5-Dec-14
PAGE: 5/6
No.:
RM052081
Advertisement
Table of Contents
