In The Field - Ricoh Sh-MF1 Technical Bulletin

Model:
Model Sh-MF1
Subject: Letter & Legal mixed sizes copy / scan
From:
3rd Tech Service Sect., MFP/P Tech Service Dept.
Classification:
Support for Letter + Legal Mixed Copy/Scan
Overview
Copying and scanning of mixed letter and legal sized originals ("LT/LG Mixed Sizes")
is now supported on the Sh-MF1.
This feature is not enabled by default. You must enable it in SP mode (see
below).
To support existing machines, the System Firmware was modified. For a list of the
target models and supported System software for each, see the "Target Models,
Firmware" table below.
To use this feature with the Scanner, the paper bank option must be installed.

In the field

To use this feature, do the following.
1. Make sure all of the following firmware versions (or newer) are installed. If they are not,
install them together as a set.
Target models, firmware
Model Firmware
01. Sh-MF1 System/Copy
02. Sh-MF1 Scanner
2. Set the following SP modes to a value of "1", which will activate the feature.
System SP Mode
5076 [Copy:LT/LG Mixed Sizes Setting]
001 0: OFF 1: ON
Scanner Service Mode
1040 [Scanner: LT/LG Mixed Sizes Setting]
001 0: OFF 1: ON
T
echnical
Troubleshooting
Mechanical
Paper path
Product Safety
Version
2.03
1.04
*CTL
*CTL
B
ulletin
Date:
6-Jul-12
Prepared by:
Part information
Electrical
Transmit/receive
Other ( )
P/N
M0525771G
M0525777C
[0 or 1 / 0 / 1/step]
0: OFF, 1: ON (0: default)
[0 or 1 / 0 / 1/step]
0: OFF, 1: ON (0: default)
PAGE: 1/3
No.:
RM052042
T.Hirai
Action required
Service manual revision
Retrofit information
Tier 2
Applied to
the production line
2012 Middle of July
2012 Middle of July