echnical
ulletin
T
B
PAGE: 15/23
Model:
Date:
No.:
Sh-MF1/P1
24-Mar-15
RM052089
10. Tilt up the bottom plate as shown.
IMPORTANT: DO NOT put pressure on the bottom plate.
The 3-inch bottom plate is not as strong as those used on standard models, since the
side fences can slide three inches. Pull the outside guide outward, as shown in the
photos, while being careful not to put any pressure on the bottom plate.
Do not press down on a small area/point too much, in order to avoid breakage.
!NG!
OK
Paper tray with bottom plate removed: