YASKAWA MA2010 Operating And Maintenance Instructions Manual page 64

Maintenance and inspection
9.3.5.10
Grease inlet 2
1
Grease exhaust port
2
See figure "T-axis gear diagram".
1. Remove plug from grease exhaust port and grease inlet port.
2. Install lubricating nipple to grease inlet port.
3. Squeeze grease by grease gun in grease inlet port.
– Amount of grease:
4. Move T-axis gear for a few minutes to discharge excess grease.
5. Wipe away excess grease with a cloth. Remove the grease zerk from the grease inlet
port, and reinstall the plug. Before mounting the plug, apply Teroson Plast sealing
compound (material no. 143813) to thread part.
-
9 64
Refilling grease at T-axis gear
11 cm³ / approx. 10 g
3
2
1
Fig. 9-14: T-axis gear
Grease inlet 1
3