Activating A Channel; Restoring Default Channel Settings; Changing The Channel Icon; Adding Or Removing Preferred Channels - Christie CP2208 User Manual

Activating a channel

To use the customized projector settings saved in a channel, activate the required channel.
1. On the touch panel controller (TPC), log on to the projector (on page 22) with advanced,
administrator, or service permissions.
2. Select Menu > Channel Setup.
3. From the Channel Name list, select a channel.
4. To activate the channel, select Activate.

Restoring default channel settings

Complete the following procedure to restore default channel settings.
1. On the touch panel controller (TPC), log on to the projector (on page 22) with advanced,
administrator, or service permissions.
2. Select Menu > Channel Setup.
3. From the Channel Name list, select a channel.
4. Select Defaults.
5. Do one of the following:
• To restore the default settings to the selected channel, select Default Current Channel.
• To restore the default settings to all channels, select Default All Channels.
6. Select OK.

Changing the channel icon

Complete the following procedure to change the channel icon.
1. On the touch panel controller (TPC), log on to the projector (on page 22) with advanced,
administrator, or service permissions.
2. Tap Menu > Channel Setup.
3. From the Channel Name list, select a channel.
4. Tap Icon.
5. Tap an icon.
6. Tap OK.

Adding or removing preferred channels

Complete the following procedure to add or remove channels from the Preferred Channels pane.
1. On the touch panel controller (TPC), log on to the projector (on page 22) with administrator or
service permissions.
2. Select Menu > Administrator Setup > Preferred Channel Setup.
CP2208 User Guide
020-101916-03 Rev. 1 (12-20120)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Working with channels
47