3. In the Select type list, select a file type to restore.
4. Select Reset Defaults.
5. Select Yes.
Moving files to the projector
You can move files onto the projector from a USB flash drive.
1. Insert the USB flash drive into the USB port on the side of the touch panel controller (TPC).
2. Select Menu > Service Setup > File Maintenance.
3. In the File Type list, select a file type.
4. Select and drag a file from the TPC Files pane to the Projector Files pane.
Deleting projector files
You can delete files when required.
1. On the touch panel controller (TPC), select Menu > Service Setup > File Maintenance.
2. In the File Type list, select a file type.
3. Select and drag a file from the Projector Files pane to the trash can icon.
4. Select Yes.
CP2208 User Guide
020-101916-03 Rev. 1 (12-20120)
Copyright
©
2020 Christie Digital Systems USA, Inc. All rights reserved.
Backing up, restoring, and upgrading projector files
65