Touch Panel Controller Specifications; Lamp Specifications - Christie CP2208 User Manual

Communication Protocol
Related information
3D sync terminal pin map (on page 67)

Touch panel controller specifications

Learn the specifications of the touch panel controller.
Type of Display
Display Size
Display Resolution (H x V pixels)
Maximum Dimensions (W x H x D)
Integrated Operating System
Communication Interface with Projector
Power Requirement
Interface Connector

Lamp specifications

Learn the specifications of the lamp.
Type: Xenon Short Arc Lamp
Projectors typically force a 10 minute cool down period. Ensure you do not re-strike the lamp any
sooner than two minutes into this cool down period since hot re-strikes reduce lamp life. The period
required to reach full brightness is 20 minutes (maximum).
Power (software adjustable)
Item
CDXL-16M (1.6kW)
CDXL-21S1 (2.1kW)
The ballast is power regulated and has a maximum current of 97 A. Therefore the maximum power
specification for a given lamp may not be achievable until the lamp has aged, since lamp voltage
increases with hours of use.
Lamp expiry hours
This table specifies the maximum hours the projector lamp can operate before replacement:
Lamp Type Expected Life
CDXL-14M 3500 hours
CP2208 User Guide
020-101916-03 Rev. 1 (12-20120)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
RS232 and GPIO
Color VGA TFT LCD, backlit
144.8 mm (5.7 inches) diagonal
640 x 480
195 mm x 148 mm x 58 mm
Microsoft Windows ® XPe
10/1000Base-T Ethernet
0.71A (typical)
12-pin Circular connector (push-pull)
Description
1000 W min., 1600 W nom., 1760 W max.
1260 W min., 2100 W nom., 2300 W max.
CP2208 Specifications
90