Christie CP2208 User Manual page 14

Hide thumbs Also See for CP2208:

Table of Contents

Locking bracket (quantity 4)

When stacking projectors, the optical axis of the projectors must be parallel to one another. The

maximum tilt for stacked projectors is 13 degrees. When you install the stacked projectors in a rack

stand or on a pedestal, the rack stand or the pedestal must remain horizontal. If you require tilt to

align your images, you must tilt the projectors and not the rack stand or pedestal.

1. On the bottom projector, remove the four corner screws securing the top lid.

2. Position a single stacking cup (011-104349-XX) over one of the empty screw holes so the

higher side of the cup faces outward and aligns with the projector skin.

CP2208 User Guide

020-101916-03 Rev. 1 (12-20120)

Stacking cup (quantity 4)

Installing and setting up

M6 screw (quantity 4)

Table of Contents

Troubleshooting