Lubricating The Hoist Rope - Manitowoc Grove GMK 5200-1 Maintenance Manual

8.8.3
Grease, spare
parts and tools
Lubricating the
rope
H
Maintenance manual
GMK5200-1

Lubricating the hoist rope

Designation
Grease
– Brush, roller, spray gun, tray or pressure pump.
Lubricating the rope
– significantly prolongs its service life and
– keeps the friction between the rope, the sheaves and the hoist drum as
low as possible.
The lubricant is applied to the rope by
– spraying, brushing, rolling or
– by running it through a tray filled with lubricant or
– by means of high-pressure lubrication with a pressure pump.
The Manitowoc Crane Group Germany GmbH recommends high-pressure
lubrication with a pressure pump (GROVE part no. 90018525) for reasons of
sustainability, efficiency and environmental protection.
When lubricating the hoist ropes, observe the instructions concerning the
lubricant.
When using the pressure pump, observe the manufacturer's separate oper-
ating instructions.
For further information, contact
GROVE dealer.
Manitowoc Crane Care
3 302 746 en
Maintenance work on the superstructure
Quantity GROVE part no.
1 03133770
or an authorised
8.8 Hoist ropes
M 3
8 - 55