Final Drives - Changing The Oil - Manitowoc Grove GMK 5200-1 Maintenance Manual

Maintenance work on the carrier
7.9 Axle lines
7.9.5
Oil, spare parts,
tools
Prerequisites
O
7 - 68
Final drives – changing the oil
Gear oil in Designation to
litres (gal)
for each final
drive:
2.7 (0.7)
for drive
10 x 6 x 10 Gasket 24 x 29 Cu DIN 7603
1)
10 x 8 x 10 Gasket 24 x 29 Cu DIN 7603
1)
Additional equipment (3
– Drain channel.
– Receptacle, approx. 5 l (1.5 gal);
– The truck crane must be raised on outriggers.
– The engine must be switched off and secured against unauthorised use;
à
p. 2 - 3.
– The parking brake must be released.
Risk of environmental damage due to leaking consumables.
Always let consumables drain into suitable receptacles. Wipe up any con-
sumables that have leaked.
Store/dispose of consumables and any soaked equipment properly.
Ask about the applicable regulations.
Specification
DIN 51502 Classification
C - LPF MIL-L 2105 B
Hyp SAE 90
ISO - VG 220
Designation
rd
driven axle line)
à
p. 2 - 4.
3 302 746 en
GROVE part no.
API-GL-5
Viscosity:
Quantity GROVE part no.
6
8
Maintenance manual
M 12
00552891
00117145
00117145
GMK5200-1