Figure 3-9: Lvds Connector Location - IEI Technology WAFER-ULT5 Manual

Figure 3-8: LVDS Connector Location
NOTE:
To use LVDS, the #33 pin of LVDS1 connector must be connected with
GND pin; otherwise the LVDS panel will not be detected, or fail to display.
Pin Description
1 GROUND
3 LVDS_A_TX0-N
5 LVDS_A_TX0-P
7 GROUND
9 LVDS_A_TX2-N
11 LVDS_A_TX2-P
13 GROUND
15 LVDS_A_TX3-N
17 LVDS_A_TX3-P
19 GROUND
21 LVDS_B_TX1-N
23 LVDS_B_TX1-P
25 GROUND
27 LVDS_B_TXCLK-N
29 LVDS_B_TXCLK-P
31 GROUND
Page 22
Pin Description
2 GROUND
4 LVDS_A_TX1-N
6 LVDS_A_TX1-P
8 GROUND
10 LVDS_A_TXCLK-N
12 LVDS_A_TXCLK-P
14 GROUND
16 LVDS_B_TX0-N
18 LVDS_B_TX0-P
20 GROUND
22 LVDS_B_TX2-N
24 LVDS_B_TX2-P
26 GROUND
28 LVDS_B_TX3-N
30 LVDS_B_TX3-P
32 GROUND
WAFER-ULT5 SBC