Table of Contents
Advertisement
Auto mode fan start temperature [40]
WARNING:
Setting this value too high may cause the fan to rotate at full speed only
when the CPU is at a very high temperature and therefore cause the
system to be damaged.
The Auto mode fan start temperature option can only be set if the CPU_FAN1 Smart
Fan Control option is set to Auto Mode. If the system temperature is between Start
Temperature and Off Temperature, the fan speed change to be Start PWM. To set a
value, select the Auto mode fan start temperature option and enter a decimal number
between 1 and 100.
Auto mode fan off temperature [30]
WARNING:
Setting this value too high may cause the fan to speed up only when
the CPU is at a very high temperature and therefore cause the system
to be damaged.
The Auto mode fan off temperature option can only be set if the CPU_FAN1 Smart Fan
control option is set to Auto Mode. If the system temperature is lower than Auto mode
fan off temperature, the fan speed change to be lowest. To set a value, select the Auto
mode fan off temperature option and enter a decimal number between 1 and 100.
Auto mode fan start PWM [30]
The Auto mode fan start PWM option can only be set if the CPU_FAN1 Smart Fan
control option is set to Auto Mode. Use the Auto mode fan start PWM option to set the
PWM start value. To set a value, select the Auto mode fan start PWM option and enter a
decimal number between 1 and 100.
Page 72
WAFER-ULT5 SBC
Advertisement
Table of Contents
