Ptt Configuration - IEI Technology WAFER-ULT5 Manual

WAFER-ULT5 SBC

5.3.2.1 PTT Configuration

Use the PTT Configuration menu (BIOS Menu 5) to configure settings related to the
Trusted Platform Module (TPM).
Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc.
Advanced
PTT Capability / State
TPM Device Selection
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
BIOS Menu 5: PTT Configuration

TPM Device Selection [dTPM (If supported)]
Use the TPM Device Selection option to configure support for the TPM.

dTPM (If
supported)

PTT
1/0
[dTPM (If supported)]
D Disable PTT in SkuMgr.
EFAULT
Enable PTT in SkuMgr
Select TPM device: PTT or
dTPM. PTT- Enables PTT in
SkuMgr dTPM 1.2 –
Disables PTT in SkuMgr
Warning! PTT/dTPM will
be disabled and all data
saved on it will be lost.
----------------------
: Select Screen
↑ ↓: Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit
Page 67