System Configuration; At/Atx Mode Select Switch; Figure 4-6: Securing The Full-Size Pcie Mini Card; Figure 4-10: At/Atx Mode Select Switch - IEI Technology WAFER-ULT5 Manual

Hide thumbs Also See for WAFER-ULT5:

Table of Contents

WAFER-ULT5 SBC

4.6 System Configuration

The system configuration is controlled by buttons, jumpers and switches. The system

configuration should be performed before installation.

The AT/ATX mode select switch specifies the systems power mode as AT or ATX.

AT/ATX mode select switch settings are shown in Figure 4-7 below.

Figure 4-7: AT/ATX Mode Select Switch

Page 48

Table of Contents