Introduction; Figure 1-1: Wafer-Ult5 - IEI Technology WAFER-ULT5 Manual

WAFER-ULT5 SBC

1.1 Introduction

Figure 1-1: WAFER-ULT5

th
The WAFER-ULT5 series is a 3.5" form factor single bard computer. It has an on-board 8
generation 14nm Intel® Core™ i7/i5/i3 or Celeron® processor, and supports one 260-pin
2400 MHz dual-channel DDR4 SDRAM SO-DIMM slot with up to 32.0 GB of memory.
The WAFER-ULT5 series includes two HDMI connectors and an 18-/24-bit LVDS
connector for triple independent display.
Expansion and I/O include one full-size PCIe Mini slot supporting mSATA modules, one
M.2 A-key slot for expansions, four USB 3.2 Gen 2 connectors on the rear panel, two
USB 2.0 connectors by pin header and one SATA 6Gb/s connector. Serial device
connectivity is provided by one internal RS-232 connector and one internal
RS-232/422/485 connector. Three RJ-45 GbE connectors provide the system with smooth
connections to an external LAN.
Page 2