Reset Button Connector; Figure 3-17: Reset Button Connector Location; Table 3-17: Reset Button Connector Pinouts - IEI Technology WAFER-ULT5 Manual

3.2.14 Reset Button Connector

CN Label: RST_BTN1
2-pin wafer, p=2.00 mm
CN Type:
CN Location: See Figure 3-15
CN Pinouts: See Table 3-15
The reset button connector is connected to a reset switch on the system chassis to enable
users to reboot the system when the system is turned on.
Figure 3-15: Reset Button Connector Location
Pin Description
1 RESET+
2 RESET-
Table 3-15: Reset Button Connector Pinouts
Page 30
WAFER-ULT5 SBC