So-Dimm Installation; Figure 4-1: So-Dimm Installation - IEI Technology WAFER-ULT5 Manual

Hide thumbs Also See for WAFER-ULT5:

Table of Contents

WAFER-ULT5 SBC

4.3 SO-DIMM Installation

To install an SO-DIMM, please follow the steps below and refer to Figure 4-1.

Step 1:

Locate the SO-DIMM socket. Place the board on an anti-static mat.

Step 2:

Align the SO-DIMM with the socket. Align the notch on the memory with the

notch on the memory socket.

Step 3:

Insert the SO-DIMM. Push the memory in at a 20º angle. (See Figure 4-1)

Step 4:

Seat the SO-DIMM. Gently push downwards and the arms clip into place. (See

Figure 4-1)

CAUTION:

For dual channel configuration, always install two identical memory

modules that feature the same capacity, timings, voltage, number of

ranks and the same brand.

Page 45

Table of Contents