IEI Technology WAFER-ULT5 Manual page 106


Quiet Boot [Enabled]
Use the Quiet Boot BIOS option to select the screen display when the system boots.

Disabled

Enabled

Launch PXE OpROM [Disabled]
Use the Launch PXE OpROM option to enable or disable boot option for legacy network
devices.

Disabled

Enabled

Option ROM Messages [Force BIOS]
Use the Option ROM Messages option to set the Option ROM display mode.

Force
BIOS

Keep
Current

UEFI Boot [Disabled]
Use the UEFI Boot option to enable or disable to boot from the UEFI devices.

Disabled

Enabled

Boot Option Priority
Use the Boot Option Priority function to set the system boot sequence from the available
devices. The drive sequence also depends on the boot sequence in the individual device
section.
Page 94
Normal POST messages displayed
OEM Logo displayed instead of POST messages
D
EFAULT
D Ignore all PXE Option ROMs
EFAULT
Load PXE Option ROMs.
D Sets display mode to force BIOS.
EFAULT
Sets display mode to current.
Boot from UEFI devices is disabled.
D
EFAULT
Boot from UEFI devices is enabled.
WAFER-ULT5 SBC