Table of Contents
Advertisement
WAFER-ULT5 SBC
Stop Bits [1]
Use the Stop Bits option to specify the number of stop bits used to indicate the end of a
serial data packet. Communication with slow devices may require more than 1 stop bit.
1
2
5.3.8 USB Configuration
Use the USB Configuration menu (BIOS Menu 15) to read USB configuration
information and configure the USB settings.
Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc.
Advanced
USB Configuration
USB Controllers:
1 XHCI
USB Devices:
1 Keyboard
Legacy USB Support
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
BIOS Menu 15: USB Configuration
USB Devices
The USB Devices Enabled field lists the USB devices that are enabled on the system
D
Sets the number of stop bits at 1.
EFAULT
Sets the number of stop bits at 2.
[Enabled]
Enables Legacy USB
support. AUTO option
disables legacy support
if no USB devices are
connected. DISABLE
option will keep USB
devices available only
for EFI applications.
---------------------
: Select Screen
↑ ↓: Select Item
Enter Select
F1
General Help
F2
Previous Values
F3
Optimized
Defaults
F4
Save
ESC
Exit
Page 79
Advertisement
Table of Contents
