Lvds Backlight Inverter Connector; Figure 3-10: Backlight Inverter Connector Location; Table 3-10: Lvds Connector Pinouts; Table 3-11: Backlight Inverter Connector Pinouts - IEI Technology WAFER-ULT5 Manual

WAFER-ULT5 SBC
Pin Description
33 LVDS Detect (GND)*
35 +LCD VCC
37 +LCD VCC
39 +LCD VCC
*LVDS Detect must be connected to GND.
Table 3-9: LVDS Connector Pinouts

3.2.8 LVDS Backlight Inverter Connector

CN Label: INV1
5-pin wafer, p=2.00 mm
CN Type:
CN Location: See Figure 3-9
CN Pinouts: See Table 3-10
The backlight inverter connector provides power to an LCD panel.
Figure 3-9: Backlight Inverter Connector Location
Pin Description
1 LCD_BKLTCTL
2 GND
3 +12V
4 GND
5 BACKLIGHT_ENABLE
Table 3-10: Backlight Inverter Connector Pinouts
Pin Description
34 GROUND
36 +LCD VCC
38 +LCD VCC
40 +LCD VCC
Page 23