Graphics Configuration - IEI Technology WAFER-ULT5 Manual

5.4.1.2 Graphics Configuration

Use the Graphics Configuration menu (BIOS Menu 21) to configure the graphics
settings.
Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc.
Chipset
Graphics Configuration
Primary Display
Internal Graphics
DVMT Pre-Allocated
DVMT Total Gfx Mem
Primary IGFX Boot Display
LVDS Panel Detect
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
BIOS Menu 21: Graphics Configuration

Primary Display [Auto]
Use the Primary Display option to select the graphics controller used as the primary boot
device. Configuration options are listed below:

Auto

IGFX

PCI

Internal Graphics [Enabled]
Use the Internal Graphics option to enable or disable the internal graphics device.

Auto

Disabled
Page 84
[Auto]
[Enabled]
[32M]
[MAX]
[VBIOS Default]
[NOT INSTALLED]
D
EFAULT
The internal graphics device is automatically detected
and enabled.
Disable the internal graphics device.
WAFER-ULT5 SBC
Select which of IGFX/PCI
Graphics device should be
Primary Display Or select
SG for Switchable Gfx.
---------------------
: Select Screen
↑ ↓: Select Item
Enter Select
+ - Change Opt.
F1 General Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit