Pcie Mini Card Installation; Figure 4-4: Removing The Retention Screw; Figure 4-5: Inserting The Full-Size Pcie Mini Card Into The Slot At An Angle - IEI Technology WAFER-ULT5 Manual

WAFER-ULT5 SBC

4.5 PCIe Mini Card Installation

To install a full-size PCIe Mini card, please follow the steps below.
Step 1: Locate the full-size PCIe Mini card slot. See Chapter 3.
Step 2: Remove the retention screw as shown in Figure 4-4.

Figure 4-4: Removing the Retention Screw

Step 3: Line up the notch on the card with the notch on the slot. Slide the PCIe Mini card into
the socket at an angle of about 20º (Figure 4-5).

Figure 4-5: Inserting the Full-size PCIe Mini Card into the Slot at an Angle

Step 4: Secure the full-size PCIe Mini card with the retention screw previously removed
(Figure 4-6).
Page 47